|
Tile Tech Pedestal System
is designed for concrete pavers to lay level over
a built up roof. The substrate can be either concrete or wood structure, with a
roof membrane over the top. The pedestal system consists of 7 standard pieces
and (user supplied) recommended Schedule 3034- 4.215” OD diameter PVC pipe.
The PVC pipe allows the pedestal system to vary in heights up to 20+ inches.
The standard 1/8” spacer on the top cap allows for an open joint and proper
alignment of the pavers. The top cap can be used by itself in areas where the
required height is less than one inch. The top cap is 1/2” in height, if required a
1/16” or 1/8” bottom shim locks into the bottom of the top cap. In applications
where 1” in height is required, the top and bottom cap can be used with PVC
and 1/8” and 1/16” bottom shims.
The “press fit” connection of the top and bottom cap to the PVC pipe requires
no gluing or other attachments. Both the wedge top shims and round bottom
shims can be used for “fine tuning” proper height if required. All top shims and
bottom shims lock into place, and all six pieces (if used) interlock, allowing no
paver movement and a level surface. The round bottom shims have a unique
“V” groove, which allows them to be scored & broken in half with a utility knife
and stacked on the bottom for those areas that are sloped more than 2%. They
lock to each other and to the bottom cap to impede movement of the pedestal.
The subsequent weight of the paver will keep the system in place. The caps can
be easily removed during installation if desired.
Green Roofs
The popularity of energy-efficient
roofs, or Green Roofs, is increasing as its value is
appreciated. The intention of the Green Roof concept is
to take otherwise heat producing areas, such as rooftops
and plazas, and provide a cooler environment. The result
is a cooler roof decreasing the buildings energy
consumption and reducing the heat island effect. The
Green Roof concept has seen wide spread acceptance
within the construction community.
|
 |
|
|
|
|
 |
Pedestal System Catalog
Tile Tech Pavers provide durability, protection and performance for the
roof system from harsh weather conditions while providing
drainage and a level walking surface |
|
 |
Pedestal Details
Roof Pedestal System elevates, levels and uniformly
spaces the paver for proper water drainage & air flow. The Pedestals are ajustable from 3/8" to 22" high with the use of
4.215" OD PVC pipe |
|
 |
Pedestal Specs
Roof Pedestal System elevates, levels and uniformly
spaces the paver for proper water drainage & air flow. The Pedestals are ajustable from 3/8" to 22" high with the use of
4.215" OD PVC pipe |
|
 |
Pedestal Test Reports
Pedestal System has been compression tested to
with- stand loads of up to 11,000 lbs PSI from heights of 2" up to 20",
when used with standard SDR35, 4.215" OD PVC pipe.
|
|
 |
Pedestal MSDS Info
Roofing Pedestal System are manufactured from recycled fire resistant ABS plastic and are very safe and environmentally friendly. |
|
|
